 |
 |
|
|
|
 |
| click for larger
image |
|
|
|
| SL-100 Slitting Machine |
Specifications: |
| Arbor Size |
4" or 6" standard |
| short_desc |
SL-100 Slitting Machine used for slitting thin gage materials such
as copper, brass and steel |
| feeder type |
Pinch roll, DC Driven |
| Machine Color |
Voss Blue |
| Machine Speed |
100 Feet per minute |
| Maximum Strip Thickness |
Up to 0.006” (0.152mm) |
| Maximum Strip Width |
11” Slit width |
| Power |
120vac, 60hz, 20amp |
| Size |
12'L x 3'W x 50"H |
| Uncoiler Capacity |
4”ID, 24”OD max, 500lbs. Max, Coil Width 12” |
| Warranty |
1 year |
|
|
|
The Voss Slitter is a versatile
and easy-to-use unit which gives you the capability to slit in-house. With in-house slitting capacity, you can reduce
your material inventory to your most commonly used sizes. This will allow you to order material in greater quantities
at lower prices. It helps reduce your dependency on your material supplier for delivery and costly slitting charges.
You will never again get stuck with odd size inventory. With the Voss Slitter you will never turn down an order because
of not having the correct material size. For quick and precise in-house slitting, compare the cost of a Voss Slitter
to your associated material costs and lost sales opportunities.
• Quick change setup guides, just move the guide up to the material and lock it in place
• Setup gages are used to set the slitter blade to the proper size
• Universal trap plates hold the material
flat at any width
• Standard DC Controlled Uncoiler holds the master coil
• Double rewind used to wind
both strips of material coming from the slitter
• Tension meters to monitor the amount tension being put on
the strip being rewound
• Quick change coil arbors
|
|
|
|
|
|
|
|
